Skip to main content
Fig. 5 | BMC Biomedical Engineering

Fig. 5

From: Optimization design of interdigitated microelectrodes with an insulation layer on the connection tracks to enhance efficiency of assessment of the cell viability

Fig. 5

Illustrates the GUI that enables the user to interact with the microfluidic impedance system. As seen in A the GUI allows selecting and defining the connection port connecting to the Arduino microcontroller. B fig. shows the sweep settings panel, which sets the amplitude of the excitation signal and frequency range and specifies the sweeping frequency’s start and endpoints. Finally, C of the fig. displays the output signal features, including the amplitude and phase

Back to article page

BMC Biomedical Engineering

ISSN: 2524-4426

Contact us